This machine applies glue to sensor board and then mounts lens holders on them.
Accurate mounting beyond that of conventional devices is now possible using image processing compensation and optical linear scale and high spec camera.
Machine has achieved clean Class 100
Features
Linear scale and 2 million pixel camera are adopted for the mounting process axis, and high-precision mounting (±10μm) is realized.
Equipped with a twin dispenser and a high-speed mount head, a standard tact of 1.7 seconds per piece (*) is achieved. *In case of optimum operating conditions: Need to discuss operating conditions
Cleanliness class 100 is achieved even during operation through thorough clean-up measures. Contamination defects are reduced by the neutralization and dust removal functions of workpieces.
It is also very simple to create coating and mounting data for new models. It supports three languages: Japanese, English, and Chinese.
Usage examples
This is the best device for VCM assembly that does not require active alignment.
□ 5 to 10 mm/tray supply (with/without lens barrel)
Dispenser for adhesive application
×2 units
Onboard head
×1 unit
Adhesive application accuracy
±35μm
Equipment Precision
±10μm
Output
UPH ≧ 1600
Imaging feature
CCD camera: 4 sets Work alignment, board direction determination, bad mark detection, application presence/absence detection, holder direction determination, etc.
Cleanliness inside the equipment
Class100
*Configuration and specifications of this machine are subject to partial modification without prior notice.
