Overview
- A continuous furnace system that receives frames after resin sealing with a magazine and feeds them into the furnace for resin after-curing and paste curing of frames after mounting components.
Features
- Seamless process by putting the product into the furnace immediately after resin sealing.
- Automatic recipe switching of curing conditions to suit the workpiece.
- Automatic recipe switching according to workpiece curing conditions.
- The cooling process prevents burns when the operator receives the product.
- Use of YAMAHA robots
- Minimal footprint achieved by optimizing the axis configuration
Option support
- Stacked magazines available
- Slitting magazine available
- Connection to other companies' equipment is also possible (specifications must be determined).
- MG QR reader option for transferring process information to the previous and next processes
Product Specifications
| ITEM | DETAILS |
|---|
| Utility | Voltage | Three-phase AC200V Single-phase AC100V | |
| Frequency | 50/60Hz | ||
| Power consumption | 20A(200V) 60A(100V) | ||
| Compressed air | 0.5MPa 50Nl/min. or more | ||
| Equipment size* | (W)1,250 x (D)1,450 x (H)2,200mm | ||
| Equipment weight | Approx. 700kg | ||
| Temperature setting range | 50℃～270℃ | ||
| Control method | PLC | ||
| Target frame size | Width 20 to 70 mm | Length 140 to 250mm | |
| Handling time | 30sec (time until MG input) | ||
| Supply and storage magazine | Supported Magazines | Slit magazine or stacked magazine | |
| Width | ～75mm | ||
| Length | ～255mm | ||
| Height | ～290mm | ||
* The equipment height does not include the signal tower.
Specifications and appearance are subject to change without notice for improvement or enhancement.
